Unboxing

1
DSC01722.jpg

Open the box labelled 1 and remove all the components. This box contains everything you will need to build your AM1 apart from the frame and fork.

2
DSC01670050119.jpg

Open the box labelled 2 and remove the frame and fork. Using scissors, carefully cut any zip ties that are connecting the components of the bike together.

3
DSC01679050119.jpg

Remove any other packing material from the frame using your hands, the paper will tear as you pull it.

4
DSC01722circled.jpg

A brake cable wire has been inserted through the frame and the end is taped to the frame. DO NOT remove this. This is there to enable the installation of the brake cables later on in this guide.

5
DSC01686050119.jpg

There are many components already installed on your AM1 frame. The components to note are the pedal sensor, housing and controller holder.

6
DSC01681050119.jpg

Do not remove anything else from the frame once you have taken off all of the packing materials.